Has anyone woven the Fall Fiesta Placemats from the Sept/Oct 2014 version of Handwoven ? This is my first doubleweave project after doing the sampler off of Jennifer Moore's DVD. The only change I've made is that I'm weaving with one shuttle so that the selvedges are combined, so changing the order of the Topaz treadling so that I do the top layer, bottom, top, bottom, rather than top twice, then bottom twice. But, after weaving the first placemat, it's only 12.5" long and the directions say that it should be 19". Doing the math, I come up with a placemat that should be 12.4" long . . . Am I missing something? I would really appreciate any insight you could give. Thank you. mkjohansen 40" 8 shaft Gillmore

Comments

Sara von Tresckow

You still must do the top-top, bottom-bottom sequence, but with just the one shuttle.

marykayejn (not verified)

But would that affect the length of the placemat?

Artistry

Hi, There is an errata for that project I don't know if it effects the length. Go to Handwoven Magazine Errata, then click Most Recent it takes you to Weaving Today, where the Errata is posted and described. Sorry I can't figure out how to do a link from my I pad otherwise I would ! Good luck! Cathie

Artistry

Sorry, it's Handwoven Magazine Corrections

Artistry

I double checked the errata this am to see if I could figure out the problem . I apologize for sending you on a wild goose chase, I had the project names mixed up, so from what I can tell there is no correction to the article. Are you including the fringe on yours when you measure? She did. Maybe the shrinkage on yours is just way more than her's did you use the same materials, did use hot water instead of warm? It's a mystery to me too. Sorry again about the magazine article, Cathie Also she's measuring under tight tension, which will make the measurement longer than if you take the tension off then measure.

pammersw

Do your picks per inch match the pattern? If you're beating harder and packing in more weft per inch, that would make it shorter.

Sara von Tresckow

Just a guess, but if you are doing top-bottom - top - bottom, there will be a bit of additional takeup. It may look fine, but by alternating layers the way you are doing, it will take more warp length than doing it the usual way.

marykayejn (not verified)

Cathie, The 19" length is stated in step #3, before talking about leaving 4" for fringe in step #4. . . that tells me that the mat itself is supposed to be 19" . . . I haven't even removed it from the loom yet and measuring under high tension. Sara, I don't really see how that would make the mat shorter . . . just use up more warp and maybe not have enough to do the entire project :-( Pammersw, My ppi is tighter . . . so, I wouldn't be surprised that the mat was shorter than it should be, but more like 1" at the very most. 6" difference is huge. What I did, was do another repeat of the color sequences. It's now 18.5" long. I wonder if that was an error? I would really love to know . . . Thank you all for your help. If you come up with anything else, I'd love to hear it. marykayejn

pammersw

I think I'm glad my first placemats won't have a pattern to repeat, just "weave till it's x inches long!" I will be warping them next weekend.

Artistry

You're quite right, I was looking at this Finished size after washing: 4 placemats 131⁄4" × 151⁄2" plus 11⁄2" fringe at each end. But that doesn't answer your question. Good Luck, it's a beautiful place mat.
Submitted by Anonymous (not verified) on