I am a novice weaver and have been reading a lot of books on the subject.  I recently got a copy of "Rag Rug Handbook" and at the end of the book the author recommends wearing a dust mask.  It makes sense, but are the fiber dust particles really that numerous?  I took lessons at a large studio where there were dozens of looms and weavers and nobody there wore one and nobody ever mentioned it.  Are there circumstances where one is advisable?

Thanks,

Candace

Comments

laurafry

Yes, I have, on occassion worn a dust mask.  If you are weaving a lot you should be aware of dust particles that can be breathed in and which, over time, can cause lung problems.  My primary way of dealing with dust is to have large square fans that suck air away from me and through filters.  Even so, there have been times when I was weaving a particularly dusty yarn when that was not sufficient and a dust mask was a necessity.  But it will depend on how much you weave, how dusty your yarn.

cheers,

Laura

Bonnie Datta (not verified)

My recent experience weaving singles hemp and linen really was an eye-opener in this regard.  There were scads of dust bunnies (dust dinosaurs) around and on the loom.  After a couple days of weaving I stopped the overhead fan and yikes!  Both sides of each blade had a haze of fiber about an inch thick.  When I dusted it off it all rolled into a pea-sized ball, indicating how microscopic those fibers were.

I think a handkerchief tied around my face will be enough protection -- I hate the rigidity of a dust mask and the leaky openings around the edges.

Bonnie.

 

Dawn McCarthy

As Laura mentioned, it depends on the time and the fiber.  When making rag rugs - if you are tearing the rags, try do it outside.  I weave with thick chenille to make rugs and after an hour or two there is a heavy coat of fiber dust over the loom and myself, you can tell if it is getting into your system if when you blow your nose, you see the colored small fibers.  I use a standing air filter which will somewhat suck away the floating fibers and capture them in the filter.  I have heard of instances where weavers with prolonged exposure to heavy fiber dust have had lung issues, by prolonged I mean years of weaving in a very dusty environment. 

Dawn

bloominloom-dawnmccarthy.blogspot.com

Michael White

Like everyone else has said, you wear a dust mask if you  are working with dusty yarn. A dust mask is cheaper then the ER, ask me how I know.

Michael

debmcclintock

Absolutely! Especially when cutting rags for rugs and reskeining yarns from the dyepot. I make a call on a mask or a fan when at the loom based on first foot of weaving & how much lint is caught on the reed and below the treadles.

crosstownshuttler (not verified)

I find soft cottons, some loosely twisted yarns, some acrylics and some others give off enough particles for me to see. If I can see it, it can send me into nonstop coughing fits which is counterproductive as well as unhealthy.

I often wear the softer pleated "germ" masks because the particle masks irritate my face. That said, if you can tolerate a rated particle mask, try to wear it. It will give you much better protection.

Mary Rios (not verified)

i wear a mask primarily while preparing the fabric - cutting and sewing, evening putting it on the shuttle creates dust - i'm amazed at how much dust it creates - sometimes i weave with one, if i can't have a fan.

celtinbirks

Hmmmm.. looks like it might be a good idea in a large studio, but I could get a nice used loom and a few disposable masks for the $430..............

lkautio (not verified)

I've used them for tow linen, dry-spun linen, mohair, and chenille.  It does make a difference in how much I can tolerate.  I like the idea of a woodworker's system, though those are noisy.

Laurie Autio

jander14indoor (not verified)

Actually the box type woodworker air filters are relatively quiet, I'm not looking at the dust vacuum systems which start getting noisy.

As to cost, well my loom is going in the family room when its finished so I'm also thinking of the other people sitting around as well as general cleanliness.  In addition, I'm also a woodworker, so I can buy the filters and make up a usable system for a lot lower costs (for me, counldn't sell them at that cost).

Hmmmm... more projects... 

Jeff Anderson, Livonia, MI

alsnipes (not verified)

As a woodworker, I ware dust masks all the time and would recommend them.   Shop  dust systems do not guarrentee removal of all dust particles from the air...

Submitted by celtinbirks on