Is it possible to weave different setts on a rigid heddle reed? I only have the 12-dent reed and am a new RH weaver.

Thanks!

Cheryl

Comments

Caroline (not verified)

Hi Cheryl, Basically a rigid heddle is made to be used with a certain size yarn. The 12 epi is quite a useful size to have, but the thickness of yarn you can use is limited by the size of the holes. If your yarn rubs, and most knitting yarns will, then they are too big for the heddle. You may be able to get away with using some of the finer knitting cottons, finer than sports weight, and of course there are some nice crochet yarns. There is a discussion on sett here:

www.weavolution.com/node/9245

on the Weaving 101 forum, which should help you understand how sett relates to yarn size, and the pattern you plan to weave. Once you have your sett organised, you would then, in the normal way of things, decide which reed/beater you will use - rigid heddlers have the heddles and reed all in one so you are limited with what setts you can use with what rigid heddles, and since its impossible at this stage of technology to make a very fine rigid heddle, you are also limited as to how fine a yarn you can use for a balanced plain weave.

Rigid heddlers do work around the challenges of sett - its not seen as a disadvantage these days!  Once you have a bit of experience under your belt you may like to get a second rigid heddle of the same size and try some of the different patterns its possible to make when you have more than 2 shafts. There are several Weave-a-Longs (WALs) in this forum successfully exploring such possibilities.

In the meantime, you could also acquire a copy of Betty Davenport's "Hands on Rigid Heddle Weaving" which is one of the great standards for learning about your loom and what it can do. You are going to have a lot of fun along the way, ;-)!

claudia (not verified)

Hi Cheryl,

Betty Davenport has a section on this in both her rigid heddle weaving books.  It is possible to thread your heddle in different ways to use it for many different size yarns and many different setts by skipping a hole or slot.  I have done it, using a 10 dent to thread at 8 epi.  It works just fine.

Claudia

geeksdoitbetter (not verified)

hey, there

i'm new ~grin~

when you say "a rigid heddle is made to be used with a certain size yarn" do you mean the whole loom itself?

or, is the heddle the bit where the yarn goes thru? and so that's why they sell just those bits in different sizes?

Caroline (not verified)

The rigid heddle is the bit of plastic with the holes and slots, and it does come in different sizes. The holes and slots space the warp out to a set amount, so if your heddle/RH is say 7.5 it will take a medium knitting yarn and have it arranged so that you can weave a nice fabric, not too tight and not too loose. If you ran crochet cotton through a 7.5 RH you would have a very lacy fabric - full of holes. Chunky yarn will not fit. If you run a worsted size  knitting yarn through a 12 RH the yarn will be too big to go through the slots and heddles, and would weave up into a very stiff fabric. so the size of the RH to use  is very much related to the thickness of yarn you will be using. The 7.5 or 12 refers to how many slots and holes there are per inch.

Many modern RH looms, like the Ashfords, are designed to be used with knitting yarns, and come with  a heddle that will cope with those size yarns. If you try to use a yarn that is too thick to go through the holes and slots, it will get stuck, and start fraying where it touches the plastic when you try and move it.

The looms themselves are limited by how wide you can make your warp, and how much you can evenly wind onto the front and back beams, especially the back beam, because you can always cut the fabric off the front/breast beam. This is called the weaving width and is not the same as the size of the loom, though most of us refer to a 20 inch loom, meaning what you can weave, rather than the actual width of the frame, which is wider.

Hope this explains it better,

cheers, Caroline

Submitted by Anonymous (not verified) on