Does anyone know the difference between having the metal screw contraptions on both sides of the top bar on the Leclerc Fanny as opposed to not having them? I have a 36" and the loom has the metal screws. I see a 27" model that does not appear to have them. Does it make a difference on how one or the other operates or feels when weaving?

Comments

jander14indoor (not verified)

Functionally they are the same.  Same feel and operation.

The one with screws just allows the height of the shed to be adjusted.  My daughter has a 45 inch Fanny which also has the screws.  Works fine. 

I wouldn't worry about that as a reason to buy one loom over the other.

Jeff Anderson

Livonia, MI

Joanne Hall

If you are weaving a twill with a 3/1 shed, the counterbalance tie-up will give you a better shed if you can change the height of the shafts.  If you are weaving with three up, you will find that raising the shafts a little will give you a much better shed.  I have done this with the Swedish looms when weaving bound weave, which has only one shaft down.  On the Swedish looms you have Texsolv cord and you put the pin in about three holes to shorten the cord.  On the Leclerc, you loosen the wing nuts and raise the shafts and tighten the wing nuts at the new height.  Leclerc cords are not adjustable, so if you get the older model, just replace the cords with Texsolv.

However, the newer model with the adjustable height also has a much better brake release mechanism.  That came in the 70s, long after the height adjustment was added.  So, there are other reasons to get the newer loom.  However, condition is vital.  Ask for close up photos.

Joanne

 

Weavin Steven

Thanks to both of you for the replies. I hadn't realized the brake also was different, that makes it a no-go for me.

Submitted by Weavin Steven on