I was having the hardest time not losing the cross while trying to thread the reed and heddles. Finally I figured a way that works best for me. I pulled out a pair of chop sticks and used them in the cross, then taped them down on the breast beam. Its like having an extra set of hands. Now I can take each thread and tie it off to the old warp without tangles, dropping threads or losing my place. I'm a novice weaver and do not have any lease sticks yet I tried loading an image of it, but I am having a hard time for some reason inserting a photo in this post.

Debbie

Comments

Claudia Segal (not verified)

Hi Debbie, Sounds like you found a good option for replacing lease sticks when warping front to back. You can also try old curtain rods or dowels you don't have to have lease sticks made by your loom manufacturer. I use dowels that I have sanded really well when I am warping my rrigid heddle loom. You might check out YouTube for videos of warping front to back. Another good resource is Deborah Chandler's Learning to Weave. Most local libraries have a copy you can borrow. She describes a method she calls her hybrid method of warping where she describes how to hold the warp in your hand while you thread the loom. You might find it helpful. As for loading pictures, check out the Help section on Weavolution. It's a tab at the top of the page next to Classes. There are YouTube videos showing how to do many things on Weavo. Claudia, Weavo co-founder

Sara von Tresckow

As a new weaver, try to understand the importance of the cross. It exists to keep your warp threads in the order they were created. This order must be maintained throughout the weaving process for quality results.

When doing any warping process, it is imperative that you use a real pair of lease sticks with holes in the ends. You make an x-connection (enter the end through the top of one stick and then through the top of the other stick. The resulting x-tie keeps the warp ends from accidentally sliding off the lease sticks.

If you are going front to back, you can eaily transfer this cross by treadling the tabby after you have tied on in the back. It is helpful to leave the lease sticks in until the warp is woven - it helps keep things stable and gives a clearer shed. To keep the sticks from moving forward, ksimply tie them to the back beam and let the warp slide through.

While the cross may appear to be unimportant for your first small projects, later on with more warp ends and finer threads, you cannot afford to compromise it.

 

Dena (not verified)

Sara-I am curious about why you see the need to keep the cross while weaving when you warp front to back. I have been warping front to back for twenty seven years, have done thousands of warps and have never put my cross back in. One of the things that I adore about front to back warping (gasp!) is that every single thread is exactly where it goes and I don't have to use lease sticks once the warp is on the loom.

Dena (not verified)

Sara-I am curious about why you see the need to keep the cross while weaving when you warp front to back. I have been warping front to back for twenty seven years, have done thousands of warps and have never put my cross back in. One of the things that I adore about front to back warping (gasp!) is that every single thread is exactly where it goes and I don't have to use lease sticks once the warp is on the loom.

Sara von Tresckow

Leaving the lease sticks in the weaving, near the back beam, assists in producing quality fabric. The opening of the shed is braced against the sharp edge of a stick(assuming Scandinavian beveled sticks) rather than just opening at the edge of the back beam. There is a slight improvement in tension by leaving them in - if there are slight variations, they can be worked behind the sticks. In the case of fine warps, having the sticks in place is an assist at locating broken warp threads. Repair threads can be moved from the edge to the middle of the cross by crossing behind the sticks - as long as the threads are straight between the lease sticks and the fell line, all is well.

Leaving the sticks in the warp is just another tool to give you more control over the project. I do notice that at the very end where I need to remove the sticks, the shed is not as sharp and the cloth is a tad more difficult to weave. This is independent of your warping method.

ReedGuy

Yeah, as to the last paragraph Sarah, this is pretty much the way it's going to be because the freedom of the heddles going up and down is reduced as the tie on rod approaches from the beam to the heddles. Happens as well with the lease sticks if not kept from coming ahead when the warp roller is advanced. I use the lease sticks to secure tension by tying them down to the beam (not roller) while threading heddles. If you just let them flop loose then your wrapped warp is going to be having warp sticks slide and tension lost. Some people do remove the lease sticks once sleyed in the reed and tied on, but that is because they don't secure them I've been thinking. It seems obvious to me (maybe it isn't) when they write about them interferring with the shed that they are not secured back by the beam. I agree that there is some advantage in the tensioning a bit of the warp. It's not a great deal noticed until you advance the warp. I will not dismiss the use of lease sticks and I'm am just a beginner.

Dena (not verified)

OK.  I'm willing to try on a couple of warps and see how it works.  I will report back, hopefully next week.

theresasc

on the Cranbrook.  The instructions that came with the new-to-me loom said to leave the lease sticks in, so I figured new loom, why not try it out.  It does make a slight difference in maintaining nice tension and it is a clean sharp shed.  I don't know if it is the lease sticks or the countermarch set-up.  This has been the first experience with a CM, on the jack looms I have still been taking the lease sticks out.  With that said, the lease sticks with the Cranbrook are thin, beveled sticks, where as the sticks with the Kessenich looms are not.

Theresa

Cheryl'B

As a new weaver, I've only learned front to back and have never used lease sticks.  I think I would like to give it a shot, as quality product is what I am after in my weaving.  

From what I have read above, after sleying the reed and tying on the back beam, I would treadle as if to tabby, slide the lease stick through the shed in back and tie the lease stick to the back beam.  Would I do this with a second lease stick as well?

Guiding Myth (not verified)

Perhaps for counterbalance and countermarche looms it is beneficial to leave the lease sticks in the warp tied to the back beam - or somewhere.  But I know from experience that lease sticks can reduce the efficience of a jack loom. The last I heard, AVL recommends always removing lease sticks for their looms.

If it works for you - wonderful - if you haven't tried it - try it and decide for yourself.  

Best wishes.

Stephanie S.

 

Guiding Myth (not verified)

Yes Treadle one tabby shed.  Put the lease stick in the shed between the heddles and back beam.  Then treadle the other tabby shed and put another lease stick in.  Then tie the lease sticks together loosely on each end through the holes provided and tie the lease stick closest to the back beam to the back beam.When you tie the lease sticks together put in the string from the top on each stick (don't go up one and down the other).

Have Fun. Stephanie S.

Stephanie S.

Joanne Hall

When I transport looms, to go to a workshop or for demonstrating, I keep the lease sticks in the warps as one more assurance that the warp will not get messed up when putting the loom back up.  And for weaving on small looms, you can slip the lease sticks past the back beam down to the warp beam.  

If you are interested in tying on a new warp, then leaving the lease stick in, or putting them in before you cut the project off is a real help for tying on in order.  This is essential on a drawloom, where one usually ties on a new warp at the back of the loom. I usually have a 3/3 or a 4/4 lease cross in a warp I have wound.  For that, the groups usually day in order and perfect order does not matter, but the warp which is already theaded needs to have the plain weave shed for the order. 

So, one needs to think ahead about those lease sticks.

Joanne

 

Dawn McCarthy

Oh Boy - the "lease stick" conversation.  I mostly warp back to front - lease sticks helping with the raddle and even on the rare occasion I warp front to back - still use the lease sticks.  I always use lease sticks - even on my AVL, if the distance between back beam and heddles (as on table looms) is reduced, I use narrow rods or slide the cross behind the back beam and warp beam.  Surprised to hear AVL "recommends removal"  I have seen them suggest tying a new warp between lease sticks and new warp with lease sticks??? and have done this sitting comfortably mid loom.  Production weaving is all about economy and tying on a new warp to existing is a time/labor saver and lease sticks make the process much cleaner.  Can you provide the info where AVL recommends removing lease sticks, I would be curious to see under what circumstances they recommend that?

Dawn

bloominloom.wordpress.com

 

 

Guiding Myth (not verified)

When I bought my AVL loom in 1999 I took the first class they offered in Chico.  At that time it was a 5 day class - focused on both weaving and computer drafting etc.  Both the weaving instructor and one of the people who spoke specifically about the loom mechanics emphasized removing the lease sticks before beginning weaving.  I recall it specifically because I took the AVL class not long after I had experimented leaving in the lease sticks with my first loom.  

I have often tied new warps on to the old - I suppose if I felt the need to use lease sticks I could treadle a plain weave shed just before cutting the cloth off - but I never felt the need even when tieing on a warp from the back. At that point I usually have lease sticks on the new warp.  I also sell my work and periodically do a production line of blankets on my AVL.

I just looked up the printed class materials - for tieing on a new warp to the old - AVL recommended:  "open two opposite tabby sheds and insert the lease sticks into these sheds behind the harnesses.  Secure the sticks together with tie tapes through the holes." This is also repeated in the manual that came with my loom.  One wouldn't be inserting lease sticks if they were already there...

Another thought - one wouldn't need lease sticks to micro adjust the tension on an AVL with a stickey beam.

If leaving the warp sticks on works for you - great! I can see that that way you wouldn't have to treadle the plainweave sheds and insert them in the end.  There are so many different weaving methods.  One production weaver I know never uses a cross - she believes it is inefficient and slow.

Best wishes, Stephanie S.  

Ellen (not verified)

On my countermarch Glimakra I always leave the lease sticks in, - for many of the reasons that Sara mentions, - and like ReedGuy I tie it on to the back beam once I start weaving and only take them out when the end of the  warp reaches it. When I thread I tie them to the front and back beams so they sit right behind the heddles, - makes it very easy to reach in and find the cross.

mrdubyah (not verified)

I usually warp my looms sectionally and therefore have no need of lease sticks at home.  However, I also weave at other places (museums, historic houses, a weaving school..) where I do use lease sticks.  I've never really noticed much difference in tension. Lease sticks are essential for transporting warps.  I have a pair of ultra short lease sticks made out of hardware store paint stirrers and string for carrying chained warps from place to place.  Lease sticks are also good for disaster recovery.  With lease sticks, you can pull the warp out of the heddles and still be able to rethread.  Without them the chances of getting the threads in order are pretty slim.      

Joanne Hall

are also a great help to have in your warp when you are beaming.  They make the warp go onto the warp beam in a nice even sheet. 

Joanne

Dawn McCarthy

I am a repeat offender lease stick user!  I make a cross even when sectional warping and slide the lease sticks in - it's like a "have to brush my teeth compulsion".  To each their own - this topic can raise strong opinions.  Whatever works for you, I am usually fly by the seat in most things in life - in weaving - lease sticks are a constant.  I have a question - how many British/European weavers use them vs not and how many us weavers use them and not?  Just curious if it is a locale thing?

Dawn

sally orgren

once the loom is no longer being transported and/or the warp is secure, I will remove them if needed, for instance on a table loom where the distance between castle and back beam is small and they may reduce an already small shed. I typically lash them tightly to the back beam. They can *usually* be re-inserted as needed by treadling the first one in, and then the second one on the opposite treadling. However, there are some threadings that do not produce tabby, so you must take that into consideration if you remove them.

They are a great assist if tying onto an existing warp. I leave one set in the back, and grab the new warp thread from the set in front of the castle. Beaming with two sets in place results in near perfect tension, like having a tension box the width of your loom!

Guiding Myth (not verified)

the tension is almost always better than the original warp but I don't use lease sticks on both warps.  Sally it is possible that what you attribute to the lease sticks is really due to the tying on process.  

When I warp front to back I find lease sticks unnecessary.  I hold the cross with a heavy string longer than the warp width which I tape to the warp beam.  It is quick and works whether I plan to tie on to an existing warp or putting on a new threading.  Now I always weight the warp (after tying it to the warp beam)and hang it as high as reasonable.  When I warp back to front I usually use lease sticks on the new warp but never thought of doing so on the old warp.  I must admit I usually weave close to the end of the warp and rarely have enough warp left on the loom.  Most of my looms make this easy.  I will keep the idea of adding lease sticks when tying on in mind if I'm done with a warp with enough left on.

I enjoy reading what processes other people use as I can always learn something.

Stephanie S. 

Guiding Myth (not verified)

All from the US. 

Stephanie S

Submitted by dcannatella on