I brought home this nice little 4 harness jack loom yesterday:

The treadle conversion appears to be a well-executed custom job, and as far as I can tell everything is complete.  I'll need to re-hang one of the harnesses and clean up the two reeds that came with it, but otherwise it looks ready to go!  Apparently it spent at least some of its life in a high school home-ec classroom.  The person selling it had grabbed it when the home-ec teacher was getting rid of it, but never got around to doing anything with it themselves.

I am finding next to nothing online about Emile Bernat & Sons Co Looms... does anyone know of a history of the company?  I know they started in Jamaica Plain, Massachusetts and later moved to Uxbridge Massachusetts.  The Bernat brand still exists (apparently based in Canada now) but there's absolutely no information about the company on their web site.

Comments

celtinbirks

Congrats!  Nice loom!  Have fun.

SallyE (not verified)

I worked on one of these last spring.   The owner inherited it from her mother, and it was in pieces.   I helped her put it together and replaced all the tieups with texsolv, etc.   It was a 4 shaft, 6 treddle loom as I remember it.

Yours has a thing on the right that the one I worked on didn't have.  What is that?

As for a newby tying it up, it's pretty simple.   The one above is direct tye up, so once you do it you are set.   If you have 6 treddles, you usually change it between patterns, but it's not hard.   Plus, you don't learn things if you only do what you already know!   : ' )

 

elizaboo (not verified)

Thanks!  The seller hasn't posted a price and I don't know what to offer her.  I was thinking low, but I don't want to insult her either.  

usonian (not verified)

Hi Elizaboo, I'm sorry to say I haven't gotten around to getting mine squared away and trying it yet! I've got too many irons in the fire, but I've been getting the urge to get back to weaving lately so I'll probably turn my attention to it soon.

I hope that others with more experience re-habbing looms will chime in as to the condition of the one you linked to, but from the photos I would say it looks like everything is there and in good shape.

If I recall from the catalog linked above, the '220' model number refers to the maximum weaving width; mine is a 214 and looks a little skinnier.  I can tell you that I paid $75 for the 214 and felt like I got a pretty good deal compared to what comparable small looms usually go for on Craigslist; it is an older/obscure make and needs a little TLC, but all the parts were there (as far as I could tell), everything seems sound, and the harness action is smooth.  Again, hopefully someone else can chime in with what might be an appropriate price to offer; I have pretty much zero experience in these matters!

Is there a weavers' guild near you?  If you do pick it up maybe you can find someone through a guild to help you get it up and running.


P.S. Not sure what thing you mean on the right, SallyE - do you mean the things at the front right corner of the frame?  I believe those were the original levers for raising the harnesses in table-top configuration.  I wasn't sure if that was where they had originally been attached, but looking at the ad elizaboo linked too it appears so!

SallyE (not verified)

Yes, Usonian, I think you are right - there would need to be levers for it's table loom operation.   The loom I worked on was built as a small floor loom to start, and had 6 treddles, so it worked a little differently.  There were jacks at the bottom and the chords from the upper pulleys went down the sides to the jacks.

Elizaboo -  well anything can be rennovated.   Whether it's worth it or not to you is another matter.   If you have more money than time, you might do better to find a better loom.   But if you have more time than money and can get it cheaply, it might be worth it for you to fix it up.  I'd guess $75 would be a fair price for it, given that it's going to be a project.

elizaboo (not verified)

I wonder what it would be like to have more money than time!  I've contacted the seller.  I think this will fit in to my budget better than a larger loom.  And I am sure it will be easier to fit into my house!  Plus I think re-habbing the loom will give me a better understanding of looms and weaving, and hopefully make me a better weaver.

Wish me luck!

Submitted by Anonymous (not verified) on