I finally have my "dream" craft room and am trying to get my looms organized. I haven't used my floor loom for years. This loom was disassembled, moved, and reassembled and now I'm having issues with lamms rubbing and tie-up hooks catching. It is a Leclerc Nilus "Mira" 45" floor loom. This is a counterbalance loom and I can see the rollers are not level during movement. For the life of me, I can't seem to get this adjusted properly; I'm sure it's quite simple, something I'm missing and it's probably right in front of me.   The Leclerc manual isn't much help.  Any suggestions? 

TIA,

Marie

Just want to start weaving again....:)

Comments

laurafry

Do you have a warp on it?  Sometimes a counter balanced loom doesn't behave until it has a warp on it to stabilize it. 

You could try contacting Tom Beaudet and see what suggestions he may have.  I have a Fanny and have no problems with it so I'm not sure what to suggest.  :(

Laura

sdmarie (not verified)

Thanks for your quick response.  I am afraid to put a warp on for fear it will continue to misbehave.  It did not act like this before.  Funny you mention Tom, he helped me in 1999 when I inherited this loom. 

Marie 

Joanne Hall

Hi Marie,

The loom will work, but it needs to have a warp on it.  So, put on a simple warp, like for a few towels.  It is easier to make any necessary adjustments when the warp is on it.  And you will not know if there is a problem until you start weaving.  I bet it will weave perfectly, but you cannot know that without a warp on it.

Joanne

sdmarie (not verified)

Guild meeting this morning then will wind on a warp...stay tuned and cross your fingers!  Thanks :)

sdmarie (not verified)

I did not have a warp on this loom so....I pulled out a warp I had from earlier this year.  Lost the cross, wound up with a mess, untangled and combed it out.  Threaded the heddles, reed, and wound on. The uneven-ness of the rollers has corrected now that I have it warped.  It's a straight draw and plain weave.  The lamms are rubbing and then the tie-up hook catches on the lamm.  If I don't pay attention, the hook will disconnect and I'll loose half the threads of the shed.  Am I missing spacers for the lamms or what have I forgotten...?  Still puzzled but getting closer.

Marie  

sdmarie (not verified)

Since the tie-up hooks were catching, I removed the hooks leaving just the string/rope(?) and re-attached using larks head.  Now nothing catches and no more scratching of the wood.  Beautiful large sheds.  I "unwove" about 1/2" and now am ready to W E A V E. 

Thanks for the advise about putting on a warp! 

I'm going to dress my smaller 8-shaft loom in hopes of weaving up a bunch of stuff for Christmas now too!

Marie

Claudia Segal (not verified)

Happy weaving Marie!  Glad to hear you worked it out.  I know what you mean about the shed size.

Claudia

Submitted by Anonymous (not verified) on