I have an old CB loom that has the treadles tied directly to each shaft.  I have seen newer CB looms that have some other kind of system.  Is there an advantage/disadvantage to either system and what are they?

thanks!

Comments

Joanne Hall

Do you have a hand made loom or does it have a name on it?

Joanne

debmcclintock

If it is a barn frame loom, you should probably attach a lamm, a stick, to your shaft and attach your shaft to that and the treadle to the lamm. You'll get a cleaner shed and the shaft will pull more evenly. I'll see if I can find a photo for you.

celtinbirks

My loom is a Sabina Folding loom made in 1945.

Joanne Hall

You might start a new topic and ask if someone has a Sabina loom.  I have not woven on one.  Usually when there are no lamms, there are only four treadles and they are very close together.  If you want to add lamms, there is probably a way to do that.  We can provide lamms, but you would need to find a way to attach them.

Joanne

celtinbirks

Actually, my loom has 6 treadles and 6 hooks on the bottom of each of the 4 shafts on which to hook any treadle or treadles to.

debmcclintock

ah, here's a nice blog that someone wrote up on their restoration of their Sabina.  It looks like it has the 6 treadles, also, 4 for pattern and 2 for plain weave

http://debbiramblings.blogspot.com/2011_01_01_archive.html

several other entries come up if you google the Sabina name

In regards to your original question, the mechanics of counterbalance are just that a mechanical way of opening your shed on your loom.  Different loom makers approach counterbalance differently based on the culture that they weave in.  There is no "best" way, there are just different ways.  Understand the way your loom was built to operate and you'll get along with it just fine.

tommye scanlin

but thanks so much for the blog link, Deb.  It was a fascinating story of the restoration of the loom!

Tommye

Joanne Hall

I too enjoyed seeing the photos of the Sabina loom since I am not familiar with that loom.  It is interesting to note that it is a jack loom.  There are other jack looms made with pulleys at the top of the loom.  Harrisville is one.  Table looms, which are mostly jack looms, are often made this way too.  Examples are the Victoria and the Dundas or Montana looms, previously called Rasmussen.

Joanne

celtinbirks

Loomcraft Studio made both a rising shaft and counterbalance looms.  I have a CB one.  The one in the above referenced blog was a jack.  Note in the photos that there is a ratchet and pawl in the middle of the warp beam.  The one in the blog had a metal ratchet and pawl.  Mine has a wooden set.  I believe mine with the wooden ratchet and pawl was an earlier version.  Interesting design.  I'm almost done restoring mine and hope to weave on it for the first time this weekend.

lkautio (not verified)

The one in the blog was definitely a jack loom.  In addition to the ones mentioned, Macomber (the big ones) and Purrington (the big ones) also operate without the scissor mechanism (which is just one of several jack mechanisms available, and maybe not the most common one across all looms).

Laurie Autio

kerstinfroberg

In my opinion, if it has 6 treadles it was meant to have more-than-one shaft tied to each treadle.

Many older Swedish looms lack lamms. It was not seen as a problem - if the treadles wanted to drag the shafts sideways, it was recommended you put the treadle cords through a ring of some sort. (I have read that a piece of cow's horn was a good choice, but you could use even a "ring" of yarn.) There is a folding loom called Göta (pic below) which is popular for classes - it only has 4 treadles, but is sold with a ring.

 

debmcclintock

GREAT loom Kirsten, I love how it is a hybrid between a table loom with the table supporting it in the back and the treadle support holding up the front.  Wonders never cease in the many different ways that looms can be constructed!  thanks for posting  Deb Mc

kerstinfroberg

Well - it has its drawbacks... you develop a unique style for beating: some prefer to stabilize it with their stomachs, some with a hand :-)

Göta was the first model, developed in the 1960ies, mostly for using in classes. After that they made the Fia ('69 or '70), which is a floor stand where you install a "casette" - you can have any number of "casettes" and change for every class. The Fia was born for "ordinary" schools (apparently every child was supposed to weave a small piece, from '69 onwards. That is not done any longer.)

When I had classes in Stockholm, we only had Götas. When I moved down here I bought some of them - I have 5 of these for workshops.

Both models can still be had, from www.wwab.se. Click on vävstolar, then vävstolar again.

Submitted by celtinbirks on