I got a new loom a month ago, and have already completed one project and will soon start my second.  I have a 12 dent reed already, but soon hope to start weaving fairly fine fabrics this spring or summer (wools and eventually linen).  The yarn types I hope to use for some of my projects are things like Jaggerspun Maineline 2/20 (38wpi with a suggested twill set of 30-36), Jaggerspun lamb 2/24, Renaissance Dyeing's Crewel Wool 2/24, and also (evetually) linen singles.  I also have an assortment of odd cones of wool singles that are quite fine and meant for weaving. 

My boss gave me a nice gift card for Christmas and I want part of it to go to a reed that is more fine than the one I currently have.  Should I get a 20 dent reed?  Something more fine that that?  Advice is very much appreciated!


Thank you :-)

Comments

Cat Brysch

to weave with, you could double sley them right now to get 24 ends per inch anyway. And, my initial reaction is that single sleyed in a finer reed brings risks of 'fuzzing' or 'shreading' the warp. Consider a 15 or an 18. Then, when you double those, you will have quite a fine sett and sounds like you would not need that fine. My finest reed is a 30 dent reed which I have routinely double-sleyed (to get 60 epi)....but mostly my setts are 30 to 48 ends per inch and I use fine cottons, silks, tencels or rayons which are smooth warp threads. The threads you are talking about using as warp need special care that they won't wear if sleyed singly in a fine reed space. Best Wishes!

ReedGuy

I have a 16 as the finest reed and I wove 64 epi in polyster (4 per dent), I plan on doing an 80 later on with 5 per dent. You gonna weave finer than that? ;) After awhile you have more wire than thread if you go too fine. ;) Also remember the finer you go, the problem becomes what am I going to thread the reed with. A 1/32" is mighty thin. ;)

But also keep in mind of double weave. If you want a sett of 32 epi for a table cloth, the sett must be doubled in the reed for the second layer. Depending on the yarn it may be easier to sley 4 per dent in a 16 dent reed than 3 ends per dent in a 22 dent reed. The more wire the less room for thread as the density of dents increase. It can work for you or against to.

Sara von Tresckow

A 10 dent, a 12 dent and either an 8(7.5 metric) or a 15 dent reed will give you a host of mathematical combinations to allow for all manner of weave projects. I routinely work at 60 or more epi and my finest reed is a 20 and that is not as nice to sley as doubling what I need in the 10.

Up to 5 ends per dent works just fine. As ReedGuy said, if you go too fine, you run into trouble. Actually, one thread per dent is not as common as multiples. And your threads get less wear when they have "company".

ryashani (not verified)

When I saw the 30 dents for sale I thought "wow, that is what I need"!  Then I did some research on the forums here and saw people talking about fine reeds being harder to sley and I started to rethink the whole thing and thats why I asked you all :-)

Guess I will go with either the 15 or 20 then (likely the 15).  Thank you everyone!

 

Submitted by Anonymous (not verified) on