Hi, just wondering if anyone weaves tapes, ribbon etc. on Box Tape Looms? We have for several years and now am making a very portable model. Its hard to find people who's interest falls in this category.

Comments

ingamarie

I've never heard of them.. what a cool little picture, how do they work?

bolivian warmi

I don't but I am interested. Can we see pictures of your work and the loom?

Schele (not verified)

My brother just made me a box tape loom.   This is the first warp.

 

Schele (not verified)

It is usually finger tensioned.  I have heard of people who attach the woven cloth to a dowel strapped around their waist.

ingamarie

What do you mean by finger tensioned? you hold it with one hand and pass the shuttle with the other??

sally orgren

There are all kinds of tape looms here in America, and many who weave on them for a variety of reasons. The highest percentage of these looms probably can be found in New England and the Mid-Atlantic, where you have a lot of historic sites and reenactors interested in the craft or owning the bands woven on these looms for their gear. (When I moved out east, it seemed like George Washington must have slept EVERYWHERE! ; - )

From a historic perspective, they were useful to make yards and yards of small bands to use for practically everything—tying on clothing, closing feed sacks, latching a gate, leading an animal, you-name-it! I have been told that very small children would have been given the task to continually weave on these looms for the benefit of the household.

Anything that had to be manufactured probably cost money (buttons? pins? hooks 'n eyes?) and zippers didn't arrive on the scene until very late after the industrial revolution here in America... (did you realize they didn't appear in Levi jeans until the 1950's?) So for many folks who didn't live near a major city or transportation hub, bands and ribbons were pretty important.

There is a book about historic tape looms that has lots of photos and different kinds of tape looms, including a pattern to make one yourself. They are basically a "rigid heddle" with or without a frame or box. You use a special beveled-edge shuttle to pack the weft into the shed. (This may confuse some contemporary RH weavers, as they may be inclined to want to pick up the heddle and use that for packing the weft in.) 

For tape looms without a frame or box, you use your body as the tensioning device, or one hand pulls the band, while the other packs in the weft with a solid tap of the beveled edge of the shuttle. The warp is tied to a tree, doorknob, hook, whatever. These bands must be woven firmly, not loosely.

Here is another kind of tape loom, called a "paddle" type. If you want to see this one in action, visit Hill House, in Millbrook Village, Delaware Water Gap National Park, New Jersey. (BTW, there are a whole bunch of other kinds of historic looms at this site, spanning the 1700's to 1940's.)

Noted American weaver Marjie Thompson has a passion and lectures about historic textiles and looms. She also has a *sweet* box tape loom that she brought to our guild to share. That was my first introduction to these types of looms a few years ago.

claudia (not verified)

Nice video and your explanation and demonstration are well done.  It reminds me of backstrap weaving in a box.  You tension the box by tying it to something firm and then just use your hands to change sheds and weave.  I suppose you could tie the weaving end to a backstrap and have both hands somewhat freer to weave. 

This is an answer to weaving while in the car. I could just tie it to the inside of the glove compartment or the back of the front seat and weave as we go.  Merrily on our way and I could weave.

Thanks, Mac.

Claudia

ingamarie

Claudia  said "This is an answer to weaving while in the car. I could just tie it to the inside of the glove compartment or the back of the front seat and weave as we go.  Merrily on our way and I could weave."

Man YOU are *hardcore* !!

 

marie

francorios (not verified)

That's one step away from weaving while driving.

Have a good day!

bowmac (not verified)

Thank you. by the way I don't always tie the loom down. Sometimes I just sit it on my lap to weave.

eastknoll

hello all! I am a living history demonstrator for years trying to promote and revive the ancient tape loom!  Just finished my book, Tape Loom Weaving... simplified. It covers the history, making a loom, setting it up, weaving stripes, and more advanced styles.

It is available on Amazon.com and at my web site, www.eastknollpottery.com.   I have a blog too... http://reggiesreenactments.blogspot.com/2013/04/tape-loom-weaving-proje…

So if you have any questions I can help you with please let me know! I love this simple loom, and it has been a joy to share with people at my demonstrations for the past 20 years.

eastknoll

It is possible! I used a gate loom and had lots of time driving across Utah and Colorado last last fall!

eastknoll

I just finished my book on the subject. Tape loom weaving on Amazon. 

I want to thank you, I have been following your blogs long before I got interested in the tape loom. You are a popular person, everyone in my travels knows who you are and have lovely comments about you!

I love your work and your enthusiam!

Coolsticks (not verified)

For those who use finger tensioning (rather than tieing the warp to yourself in a backstrap manner) with a box loom, can you give some suggestions as to how to improve selvages? Mine look like a kindergartener wove them, and I have been successfully backstrap weaving and inkle weaving for years!

Submitted by Anonymous (not verified) on