I recently bought an AVL 8H home loom from the original purchaser....After, totally taking this loom apart and reassembling it...I found several odd situations...After posting on several weaving sites and FINALLY after several mails to AVL...I finally got answers to the oddities. First...the loom was ordered with the full frame, inserted eye heddle system...BUT....AVL had sent the wrong cables...the cables for the string/2 stick harness system....hence..the full frame harnesses hung too low to weave correctly....the new weaver [original purchaser] didn't realize she had the wrong cables....I do!!!!....Now AVL will sell me the correct cables for $40.54 ea. for a total of $324.32...these cables should have been sent to the original person to begin with....Secondly...I asked AVL about getting the stick harness and string heddles that actually match the cables they sent with this loom...that will cost $98.11 per harness system..totaling $784.88.....My post here is to request any help for information so I can construct the 2 stick system that will match the cables....that way, the harness height will be correct for proper weaving....I do prefer the texsolv heddles anyway...does anyone have any extra heddles sticks...the hook placement doesn't matter...they can be moved...or simply provide the size of the wooden heddle sticks...Also I will need to know the correct string heddle size....I would truly appreciate any help...info...that you can provide so I can get this loom running...at that point, I can sell the inserted eye heddles [BTW...they are in great condition and there's a ton of them]

Comments

laurafry

Should you wish to buy more of the cable it can be purchased at a wire rope industrial supplier.  Take a sample of the cable to them so you get the correct size.  The metal knobs (knurls) and the tool to crimp them can also be purchased. 

Cheers,

Laura

jlread (not verified)

Thanks Laura....I have already explored the idea of resizing the existing cables...that could happen...I am having a little difficulty finding the correct 'tubes' and sweging [crimping] tool...I will probably need to make a few calls on Monday...JR

jlread (not verified)

can anyone give me the size of the texsolv heddles that are on the home loom equipped with the "2-stick" harness.....JR

jlread (not verified)

Finally...after a few months of fooling around with AVL [that was a waste of my time...will post later about that experience] and over thinking the problem....During an e-mail frenzy with a weaving 'cyber friend'...a thought came to me....Why not use texsolv loop cord in place of the wire cables...that way I can adjust the height of the heddle frames.  Also, why not replace those little wire "tie-up" thingys with a facsimile of AVLs' new and improved dog leash clips.  OK...off to find my stuff...Vavstuga was interested in my project and sent my loop cord post haste....my local hardware store had snap clips in just the right size.  After disassembling the cables to rescue the black tube and lock nut [real rocket science items]...I reassembled my new harness 'cables'. After a few minor adjustments and then using the new 'clips' to tie up the next pattern..everything seems to be ready to go!  My total cost for this re-do was about $30....a far cry from the dollars AVL wanted to fix a problem they created in the first place! I have included several pix of 'the fix'....nothing like good old yankee ingenuity!

WeaverDave (not verified)

Congrats on finding your own simple solution!  Texslov heavy loop cord is wonderful stuff.  I just can't figure out why loom manufacturers have such high prices for what amounts to bunches of sticks and string. 

jlread (not verified)

Sometimes when you just exhaust all 'reasonable' solutions...there is room for the real solution. I did use the lighter weight loop cord, the heavier cord will not fit into the wooden rollers correctly...Since there is no abrasion, to speak of, on the cord..it should last a long time.  I am now trying to approach loom fixing from a new point of view....Keep it Simple.  Dave..great idea for the PVC looms...let me know when you prefect a larger floor variety and thanks for your support.....JR

jlread (not verified)

Somehow my post got posted twice...how did that happen?....posting gremlins?

WeaverDave (not verified)

JR -the action on your AVL loom looks like it would be very smooth to operate.  Those large wheels must make it easy to lift the harnesses.  Havey you had a chance to weave on it since making your repairs?

Also, it's funny you should mention a larger floor variety.  I'm working on a design for a 60" countermarch floor loom that uses prefinished metal beams for the frame.  Like the PVC Loom it should be a fraction of the cost of a wooden loom.  I think I can make one for somewhere between $500 to $700. 

I have some of Peter Collingwood's books on run weaving and have always wanted to make rugs.  But, I could never afford one of those big Swedish looms.  So, I decided to try some of his rug weaving techiques on smaller projects like scarves and table runners.  It's lots of fun.

jlread (not verified)

Not much action yet!!!!!....I still need to chain the warp then get it on the loom.  The lifting action of the AVL is strange if you have used a countermarch or even a jack..there are springs on the 'lamms' that assist in returning the harness to the neutral position....but it acts like a jack loom because the treadle depression actually lifts the harness by way of the side tie-up then to the texsolv that 'runs' over the wooden rollers > to pull the harness up.  I can send you more pix if you're interested. I tried a run through of the treadling pattern and it went very well...we'll see after I get ready to weave.

A larger loom would be really great...then figure out how to make a fly shuttle...that's real fun!!!

carla rollins (not verified)

Is it me?  I bought a brand new 30" V Series last winter - I have yet to weave on it.  I have put warps on but it just does not work, at all.  The harnesses do not respond with the dobby.  I call Avl continuously for help....miraculously they all seem to be busy, working with other customers; who knows; as I don't get through to anyone.  Once I got the owner, he helped but it went back to shit after 5 minutes again.  I've been weaving on a Norwood, 8 harness for 25 years; a prolific weaver.  I just don't get this.  Something is amiss but AVL is not recognizing it may be their product.  Should I pack it up and ship back or call my lawyer...what to do, it cost almost 10 grand.  The dissapointing part is I have dreamed of an AVL for 25 years, here I am with one huge dissappointment.  Advice?

Claudia Segal (not verified)

Hi Carla, You must be disappointed after saving for so long and then finally getting the AVL loom. I have always found that letters sent directly to a company with specific questions about what problems you have faced are helpful. I also suggest you join the AVL group on Weavolution and read through the posts there. I recall someone writing about the V Series a few months ago but I do not recall what they said. In addition, I suggest you post your questions and concerns in a new comment post in the weaving section and see if one of the AVL users can lend a hand. I wish I could offer more concrete advice. Written letters (keep a copy for yourself) have always worked best when I am advocating for assistance. Good luck and keep us posted. Claudia

Dawn McCarthy

Judy - I am so happy the texsolv worked - I swear the amount I use I should invest in stock!  I have used it for my cm, my Harrisville looms, I reconstructed an old loom and used it for that, I used it for my drawloom parts and so on.  I am still working on a flybox, a single one should be easy.  Its getting it to attach to the bottom beater of the Toika I own.  I mapped out plans for a double box (will be using some texsolv on that I am sure) - Ill let you know how that goes although I may purchase one made for my AVL and build one for the Toika.  BTW - if you are looking for a 60 inch Cranbrook (4 shaft - VERY inexpensive with a warping mill for 1,000) I have a contact for that.

Dawn

Submitted by Anonymous (not verified) on