I just got my baby wolf and I am working on the the sampler hand towels former the summer 2003 issue of weaver's craft.  I'm on the second towel working on treadling number 48.

48. 1-2-3, 2-3-4, 1-3-4, 4, 1, 2

 

It's basically 3/1 twill and 1/3 twill stacked on top of each other.  How do you beat, weave, whatever this draft, so the weft doesn't "hide" under each other?

 

  x       x         x       x       x         x               x       x         x   x   x x x   x x x       x     x x x   x x x     x     x x x x   x x x   x     x           4       4         o o     3       3   o   o         2       2           o   o 1       1       o o        

Comments

lkautio (not verified)

What yarn, sett, and ppi are you using?

Laurie Autio

oriquilt (not verified)

 

5/2 Perle Cotton
EPI: 20, sleyed 2 per dent
PPI: 16 to 24

claudia (not verified)

It looks like you have a good epi for the 5/2 pearl or perle cotton, your ppi is ok, too.

I would suggest you place the yarn rather than beat it.  Pearl cotton can be a little slippery to work with and the best way, I have found, to handle it is to place it with the beater rather than beating hard to get the ppi you want.  Your ppi with a sett of 20 will more likely be around 16 to 18.  Try to just weave and pull the beater gently towards you on a closed shed or on the next shed in the treadling sequence. 

The slipping you describe sounds like you may be beating with a little too much enthusiasm.Keep us posted and include pictures if you can.  It makes it easier to diagnose.

Happy weaving, from one Baby Wolf owner to another,
Claudia

lkautio (not verified)

I think you can beat this square (20 ppi) with a 3/1 and 1/3 twill.  The 24 ppi is probably just too high and obscuring the pattern a bit.

This treadling might fix the problem you are finding by giving a clean beak between the 1/3 and 3/1 sections:

OLD: 1-2-3, 2-3-4, 1-3-4, 4, 1, 2

REVISED: 1-2-3, 2-3-4, 1-3-4, 2, 1, 4 (or: 123, 234, 341, 412, 3, 2, 1, 4)

Laurie Autio

Submitted by Anonymous (not verified) on