Has anyone used three heddles on the Harp?  I have two sets of heddle blocks.  I thought it wasn't possible to add a third, so where do you position the third heddle?  What do you do without a block?

Thanks!

Comments

mmorse (not verified)

It looked to me as if there were a third set of holes for heddle blocks in front of the main heddle, in addition to the second set behind the main one. Also, though I can't find the source immediately, one of the online things I've seen had a pattern for herringbone with two heddles, and since they moved together up and down, the person who wrote it suggested clipping the two heddles together once they're warped. If you did something like that and added the usual second heddle, that would give you three. Just a guess--I'm very new at this--project 5 since summer, which is another scarf, though I'm spinning some of my own warp and weft.

I'm sure I started with this post, so maybe you can find it from there.

http://askthebellwether.blogspot.com/2009/02/what-can-you-weave-with-2-heddles-on.html

--mm

 

WeavesToo (not verified)

 Thanks, mm

I am starting to feel as if I jumped in the middle and missed something.  I got going on the three heddle plan, because it didn't require a pick up stick.  It seems that the bellwether isn't using a pick up stick.  Tomorrow, I have to compare the list of what she can do with two heddles.

The third (and really fourth) set of holes on the Harp look to me like they would end up mounting the block backwards.

There are drafts where two heddles would move together, so that's a good point.

I'm starting to gather that the solution is imagination, velcro and a clamp!

 

Mariaweaves (not verified)

Perhaps the extra set of holes you see are for the stand?  A closer look at my Harp tells me that a) I only seem to have room for one more heddle; and b) all of the "scroll" shaped parts are mirror images of each other, meaning you can put the parts together several different ways and still end up with a properly working loom.  I would be interested in hearing about the 3-heddles but not planning to try it anytime soon!

Erica J

 As I was warping my new harp this weekend I looked at this. I am using Peggy Osterkamp's back to front method of warping, as I'm warping with two heddle blocks and 32". Anyway her method involves hanging the lease sticks off the looms castle, which the harp obviously doesn't have. So in trying to figure out how to carry out this step, I started thinking about the 3 heddle question.

I had noticed earlier that there were holes for a third heddle block set. Upon actual investigation, I found that there are actually enough holes for 4 blocks on the harp. However as Mariaweaves pointed out these are there because there is no true front or back to the harp. What I discovered is that at least with the 32" harp there is space and holes for 3 heddles. However one of the block sets would be backward. So if you were really good at remembering that you had to tip heddle 1 backwards to move it up and down then you could actually attach a third heddle. However I think using that block set to support a rod for string heddles would likely allow you to do the same thing while keeping more of your sanity! I hope this all makes sense. If not I can take pictures to illustrate what I'm talking about!

Cheers,

Erica

claudia (not verified)

Hi Erica,

I also have a Harp and love Peg Osterkamp's methods of doing almost everything. When warping the Harp from b2f I loop the ends onto the apron rod and drape the warp over a chair with weight at the end of it. If I have a 5-7 yard warp I hang a weight, like a hammer, in the middle and another at the end. I tend not to use lease sticks with the rh loom and I start winding on and insert 12-18" pieces of craft paper as needed being careful not to overlap them for more than about 1/4".

It's hard to write these things out.  I also posted pictures for winding a warp and beaming it f2b here which is what I do most frequently with the Harp. Probably because I followed the printed directions that came with the loom and found it's reasonably quick.

Just my $.02

Claudia

WeavesToo (not verified)

 I just checked in here as I finally, today, have the time to do what I started weeks ago.  Off to warp the three heddles.  I may end up just resting the third.  I'm not ready to commit to always doing this three rigid heddle method so I don't want to add any holes.  Thanks to everyone for the discussion to date.

Submitted by Anonymous (not verified) on