Vicki is unable to post pictures from her computer at work and asked me to put these up for her.

Here are some shots of her homemade temple

Vicki may be able to come on and explain how she made this and how it works.

Claudia

Comments

debmcclintock

I was having trouble visualizing the rubber band part, excellent solution, would need to invest in highgrade rubber bands to ensure they don't stretch out as you weave!  thank you for taking time to help post photos!

Vicki Allen (not verified)

First of all: Thank you very much, Claudia. I am so glad to be able to share these pictures.I have tried various homemade temples but I found that when I used the strings hanging over the sides of the loom, I kept dropping them and having to get up and pick them up again.  I found Deb's blog on line and after reading Deb's idea using bamboo and pins, I looked around for what I might have on hand. I already use rubber bands for lots of stuff and the lease stick was just the right length!  Here is the original post about the temple:Submitted by Vicki Allen on Mon, 12/06/2010 - 4:18pm

"I want to share this idea for a homemade temple. I had used a gem clip with a weight hanging from it with my Bernat loom. It had rails on each side that the string could hang over. But then I sold the Bernat and got a Macomber loom. There are no side rails. So I had to come up with another solution. I had seen somewhere a bamboo strip bent and inserted into the cloth on the underside but I did not have any bamboo.

After playing around with the concept, here is what I came up with. I took a lease stick that is wider than my warp on the loom. I attached a jumbo rubber band on each end through the hole in the end of the stick and attached a large gem clip to that. I attach my temple under the warp and it holds the cloth out with just the right amount of tension while staying completely out of the way. It doesn't interfere with my seeing the fell line and it is easy to move."

The last picture is my sweet spot measuring stick: The unshaded area is the spot where weaving is best. The mark closest to the breast beam is the point I can advance the fell and have the reed just right. I can weave more than this but the stick gives me an idea when I need to advance so my weft is slanted enough for take up.

Thanks for looking, folks. (p.s. This is the peaches and cream cotton placemat project I had so much trouble with. The temple helped a lot.)

Vicki

ruthmacgregor (not verified)

Excellent -- thank you, Vicki and Claudia!  Those photos help a lot.  I was visualizing something totally different, and my vision didn't work nearly as well as the real thing clearly would!

Ruth

Joanne Hall

Maybe the rubber band could be replaced with a tie-up cord.  It may be harder to put the clip on the selvage, but the width would not vary.

Joanne

debmcclintock

A new use for texsolve & pegs!

TinaHilton (not verified)

Fantastic!  I can't wait to give it a try.  I forgot to pack my temples for our trip to Florida for the winter, so it's a good time to try it.

szspins1 (not verified)

I have one loom that is very particular about how far the warp can be advanced, I am off to make a marking device. Thanks Suzy

weave2 (not verified)

I think I prefer this method to the bamboo suggestion because it is under the cloth and doesn't involve pins or needles.  A little groove or slit on each end may hold the rubber band more securely.

Vicki Allen (not verified)

I'm so glad you all found the temple idea worthwhile. I keep the width from varying by the strength of the rubber band, I just tie a knot in the rubber band if it is too loose. It has worked so far for the yarns that I have used.

I had to make the marking stick to keep my sanity. Now that I have the Macomber and can advance the warp from the front, I don't have to get up. BUT I kept advancing it too far! The stick keeps me from doing this! I weave much more evenly if I don't get up and down. Whenever I get up, I find a reason to waste time... snack, check the weather, etc!

Happy Weaving! Vicki

3looms (not verified)

Thanks for sharing it with us!

illoominated (not verified)

I got some tiny bungee cords at an auto parts store to use to hold my beam out of the way when I'm dressing my loom.  I bet they would work instead of the rubber bands.  

illoominated (not verified)

I got some tiny bungee cords at an auto parts store to use when I'm dressing my loom.  I bet they would work instead of the rubber bands.   Or, maybe some velcro strips would hold the tension just as you like without stretching out. I've never used a temple.  Do you want it to have a little give?  You should post your idea in the Home Built Equipment group.  

Vicki Allen (not verified)

Thank you all. I'm really glad I shared this idea. It's nice to see folks take an idea and customize it according to their needs and what they have on hand. That is basically what I did.

I like the rubber bands because they do have a little give and I can adjust the tension until it is as much as I need. Basically, I am using it to make me more aware of not fiddling with my selvedges anyway. I have found that if I weave more deliberately (slowly) and place the pick with a good bubble rather than throwing the shuttle and changing the shed, I don't have to worry so much about the width drawing in. I am sure this is all just part of the process of learning to weave.

At first I was so enchanted by the idea of the rythmic sound of the treadles and reed, that my weaving suffered.

Try your ideas and see what works for you. You won't know til you try it. If it works, share it with us!

Vicki

Bonnie Datta (not verified)

Your improvised temple is wonderful.  Since seeing it I've used the idea for a couple of pieces already.  I've modified it a wee bit -- I use a stick shuttle instead of a shed stick (it has those cutouts on the ends that the elastic can slide into), I use big safety pins to stick into the web, and I put the stick on top of the web (I found the weight of it pulling the edges down to be a bit troublesome).  For my rugs I still use a purchased temple, but for lighter-weight textiles this is totally adequate.

This is the best tip I've seen since I read about using a buckwheat pillow to sit on while weaving -- no more weaver's bottom pain!

Bonnie.

 

Vicki Allen (not verified)

Thank you, Bonnie. I'm glad you can use it. I am going to have to find another piece of wood to use, too, since I now need my long lease sticks for the warp! But I like the flexibility of the lease sticks so I am looking for a strong, somewhat limber piece of wood. (Might just get another pair of lease sticks!)

And thank you, Claudia, for posting the pictures for me! I have had such fun sharing this idea and meeting new folks. This web site has really made me feel like a part of the large weaving community. I don't feel like I am on the outside looking in any more, but now I am a part of it, and other weavers can hear my voice, too.

Vicki Allen

Submitted by Anonymous (not verified) on