Hi all...I need a smarty pants or a teacher. I'm learning how to read a draft. I found this one and thought it would be a good one to start with as it's fairly easy. http://www.handweaving.net/GalleryDetail.aspx?GalleryItemID=54 

Let me talk my way through it and someone can tell me if I'm totally off the mark.

When I read this I see that the warp is red and the weft is white as indicated by the color bars on the top and side of the draft.

I understand the threading draft ... the first 12 heddles are threaded as seen; shaft 1 is threaded in the 1st, 3rd, and 5th heddles; shaft 2 is threaded in the 2nd, 4th, and 6th heddles ... and so on as the pattern repeats across the piece.

I understand the tie up draft: you're tying the first treadle up to shaft 1 & 3, the second treadle to shaft 2 & 4 and so on.

Now the treadling draft...that's where I'm not sure. In this draft it looks like you're reading from top to bottom. First you push down treadle 1 (which gives you shafts 1 & 3 ) Then you press treadle 2 (giving you shafts 2 & 4) ...then treadle 1 again and so on. Am I reading this right?

Thank you great weaving brains

DJ

Comments

Alison (not verified)

 Hi DJ,

You are right - for this draft, the treadling is top to bottom.  Note, however, that there is a standard repeat.  You could treadle this from bottom to top.

I personally prefer bottom to top as I am weaving in the direction of the draft, but that is strictly a personal preference.

See - you had it!

Su Butler

HI DJ.....any draft is always read from the point where the three elements meet.......so in this case, the threading draft is on top, the tie up is on the upper right and the treadling is on the right side of the page.  This is the American method of drafting.  The threading draft is read from right to left, just as you have explained.  The tie up is also read as you explained - the first column represents the first treadle and so on.  The treadling is read from top to the bottom, meaing the first treadle will lift shafts 1-3, the next 2-4, the next 1-3 again, the next 2-4 again, then the next four picks would be lifting shafts 1-3-4, 2-3-4, 1-3-4, 2-3-4 and so on. 

You can always tell the way to read the draft by starting to read any of the elements from the point where threading, tieup and treadling intersect. 

Su :-)

djfiberarts (not verified)

Yay! I got it right :) Thank you ladies!

DJ

Submitted by Anonymous (not verified) on