I have a new warping board to go with my small "backstrap" (frame) loom.
This warping board is made from a section of 2x4 and 5/8" dowels. I used a drill press to drill 5/8" holes in the 2x4, then pounded the dowels with a hammer into the 2x4. They will NOT come out, as I had to saw off the pegs I needed to move.
I plan on making a lot of sample bands and this is the pefect length... 32" around the pegs.
I added the double cross to make it easier to insert the string heddles and the shed stick.
Sharon