Just posted on my blog about how I tear my AVL apart in order to thread it.

http://laurasloom.blogspot.com

Any other suggestions for people?

Cheers,

Laura

Comments

TinaHilton (not verified)

A video of you taking it apart!  The pictures are pretty good, though.  I have a warp I'm putting on my AVL now.  When I get to the threading step, I'll at least attempt removing the beam and beater.  I'm in a hurry, though, so may put it off till the next warp if I think it's going to slow me down.

laurafry

A video would be harder to manage as I would have to have Doug behind the camera.   :} 

On my Production Dobby loom taking the loom apart is truly very easy.  Newer models may be more difficult.  But honestly, it takes less than a minute to remove the gear wheel from the sandpaper beam, undo the bolt holding the bracket in place, then lifting the beam, tipping it and carrying it to the corner for storage.  The first time would take a little longer, of course - I have all my tools close to hand, etc.  It would be more difficult if the bench was still in place, too.....

Cheers,

Laura

TinaHilton (not verified)

Well, mine is the PDL and also has the bench.  The bench works well for me.  I started out with it straight, then the bolt loosened and I discovered I liked the seat leaning.  But, I forget about that and set things on the bench when not weaving.  Any accidental bumps sends those items bouncing to the floor.

laurafry

Heh - I can well imagine!  :D  Glad the bench is working for you - is it all the way across or only partway?  Mine was originally only part way, so removing the beam wasn't a big problem even when it was on.  Just more convenient now that it's gone.....

Laura

TinaHilton (not verified)

Mine's all the way across.  It help keeps me limber to have to swing my legs over :-) 

kerstinfroberg

As the bench was waaay too low for me (I also have the PDL), I was happy when I found an office chair with a spring regulated tilting seat and an "automatic" (you know - push the button - stand up, and it rises, sit down and it lowers) height adjustment.  For the other loom I have another type of stool - like an oversize bicycle saddle, and a round bottom. The round (ok, roundED, then) bottom means the whole thing tilts if I lean over. Very comfortable!

BUT. On the "taking apart" issue: I have both a single flyshuttle box and a double one, and I change them fairly often. (I wish it were easier to "fly" the double box, then I didn't have to change...) What troubles me is the number of carriage bolts - I wonder how many more changes the holes will survive, until I have to replace them with ordinary bolts.
My other loom (a trad Swe CM) has no bolts at all - everything is helt together with wedges. I think that type of construction is much better in the long run, as the dis/assembling will never weaken the structure. It is also (I think) more forgiving when humidity changes. 

- should someone be counting: I, too, take the sandpaper beam off for threading. I dont take off the (hanging) beater, mostly because the "grasshopper legs" and the auto advance also have to be taken off. On the CM I take off the breast beam and the beater.

 

laurafry

Well, I've been tearing my loom apart routinely, sometimes every a week, sometimes every a day, since 1982 when I first got the loom.  And it seems to work just fine.  :)

Cheers,

Laura

Submitted by laurafry on