Creativity (not verified)

These projects are beautiful!  May I ask, do you use any sort of magnification when working on them?  I'm quite intrigued! 

Off I go to warp one of my looms!  You've inspired me!

Creativity (not verified)

Hi Kathe & all!

Anne from Belle River Ontario Canada here...Belle River is in Southern Ontario about 20 minutes to the Ambassador Bridge into Detroit Michigan...

I have a small but wonderful home studio filled with fibrey-type things & I spend almost every spare hour I have in there with some sort of fibre in my hands.

You can learn more about me at my website www.youarecreative.ca or stop & friend my on Ravelry where I'm aka Creativity!  I've just recently started a blog http://skeinsandshuttles.blogspot.com & would love for yu to stop by to visit...follow me & I'll follow you!

Looking forward to meeting some new fibre friends!

Cheers & Happy Spring!

Anne

Kathe Todd-Hooker (not verified)

no I don't use any magnification-just good light and my regular classes.

AlbaRanch (not verified)

Hello Everyone,

My name is Melisa Morrison from Alba Ranch.  I weave on several Rigid heddle looms and just love them.  here are two projects that I have done this year. 

Holly Berry Ruana is hand spun, hand wove, on 32 in rigid heddle in double weave with double heddles using pick up sticks for double width.  it was double everything. ha!  my frist one and it is all mine.  weather is just changing so I will be able to wear it soon.  can't wait.

                                                                                                                     

Bits and Bobs is an entry that was just shipped out yesterday to a large art show in Grand Rapids, MI.  Art Prize 2011.  didn't really see any fiber artists much in the entire show of 1500+ artists EACH year so trying to represent for Fiber!

Jacket, wrap skirt in kilt fashion and matching bag.  hand spun and hand wove on Rigid heddle then crocheted together and fulled in the washer as an expierment!

                                                                                                                 

 

Claudia Segal (not verified)

The loom was created by Dave Holly and he just joined Weavolution.  I believe he gets on almost daily.  I'll let him know you have a question about the brake.

Claudia

WeaverDave (not verified)

Hi sequel,

That's my book!  :)  I had a really hard time working out the brake mechanism for the loom.  Especially since Loom manufacturers DO NOT want to sell you brake parts unless it is as a replacement on one of their own looms.

So, I found a very simple solution.  Bar Clamps! 

There are 2 large eye hooks that you insert into the bottom of the loom frame for the tail part of the bar clamps.  The clamp part then grabs the roller to hold it still.  It works very well and I even explain how you can use the bar clamps to assist you during the construction of the PVC Loom.

When weaving I first loosen the rear roller bar clamp and advance the warp a few inches.  I tighten the rear bar clamp on the roller, and then loosen the front clamp and pull the finished weaving forward.  Takes about as much time as any table loom to use.

I've used the bar clamps to secure a raddle to the rear beam when putting on a new warp.  They are really handy to have around.

Here is another view of the loom.  You can see the clamps on the rear left of the loom.  There is one on the right front, but it's getting cut off in the photo.

Threshkin (not verified)

Why not just set up a friction brake system?  They are pretty simple and could be done with just a piece of rope and a spring.

WeaverDave (not verified)

Actually, the bar clamps worked so well that I stopped looking for other solutions. 

WeaverDave (not verified)

I have been amazed at what primitive cultures were able to do with sticks and string to create beautiful and useful textiles.  And, they did it using "found objects" in whatever region they lived.  Sheep, goats, hemp, linen, branches, logs, etc. 

So, I decided to design a loom that was made from "found objects" in our modern era.  And, I accomplished this.  Everything you need to build this PVC Loom can be found at Lowes, Home Depot, and Sears Hardware – minus the reed and heddles.  I avoided buying loom-specific hardware and devices as much as possible.

What I discovered along the way is that we have the benefit of a vast array of precision-made objects like PVC pipe and dimensioned lumber.  Other than sawing PVC Pipe and cleaning up the edges, no other finishing is required.  This is much easier to use than a “found” tree branch.  PVC pipe is straight and it fits snuggly into elbow and “T” joints.  The success of the PVC Loom is due to the use of these inexpensive objects.

I really enjoy weaving projects on a loom that I built myself.  I see many people weaving on frame looms that they built themselves or old looms that were restored.  It creates the economy most people enjoy in other crafts like knitting.  Look at what people can do with 2 needles and some yarn.  You have to work hard to pay more than $20 for a pair of knitting needles.  I think this lets people create something that’s worth more than the sum of its parts.

Threshkin (not verified)

Dave,

PVC pipe is a nice material to work with but it does not have a lot of lateral strength.  Do you have much trouble with the front or back beams bending under tension?  I noticed that the warps you show in your web site pictures do not appear to be under a lot of tension.

I strongly support your attitude towards DYI and using found objects.  I first started researching building my own loom about a decade ago but was stymied by a lack of plans or innovators like yourself.  I wound up approaching "found objects" from a different direction and have been able to locate several used looms for little or no money.  Typically less than the value of the wood used.  It gives me a lot of satisfaction to know that I  am using a loom that might otherwise have wound up in the garbage heap.