claudia (not verified)

Wow, your enthusiasm is wonderful and slightly infectious.

It's time for me to calculate sett and size and get rolling. 

Off to the basement.  Oh, I was supposed to say, off to the studio.  Anyway, I'll be back soon with pictures of yarns and a plan.  I'm going to post the details of the project before I start.  Just to be sure I understand what I'm doing.  This is a bit of a stretch for a young (experience, not age) weaver.

Please post photos of the twisted chenille or of the beginnings of the project on the loom

Thanks,

Claudia

weaversouth (not verified)

Got my reservations for the KOA ground!  I'm in a "PUP" anybody else???

Nancy C

msjoe (not verified)

I may join you all at the KOA--I'm in a small Airstream

Any one else driving from California?

Michelle S

TinaHilton (not verified)

Great!  We have friends (not Weavo members though) who will be camping with us in their motorhome too.   The more the merrier!

claudia (not verified)

Hey Steve,

Thanks for posting the direct warp method for the Log cabin.  It gives people an alternative to my warping board version.

For some reason, I always end up using the warping board on the back of the Kromski and forget about the ease of direct warping.  For this project, it takes a little manipulation but works perfectly well.

Claudia

francorios (not verified)

Steve,

That is exactly how I warped the Cricket RH loom for this log cabin weavealong.

If you look at my blog, http://francosfiberadventure.blogspot.com/2009/11/log-cabin-pattern-scarf-on-cricket-loom.html

You will the first picture is show the two colors pulled alternately through the slots. I used direct warp to put the yarn on the loom, then wound the warp on. The next picture is showing the back beam of the loom after I sorted  and redistributed the threads. It worked well enough. I sorted two threads at a time.

If there is a better way, I would like to know also.

Also, every time I advance the warp, I use a crochet hook to straighten out the warp coming over the back beam. If one thread is laying on top of another, it could keep that thread from opening with the rest of the shed, causing a missed pick (float) to occur. And always keep checking your shed for warps that stick. I stick my fingers in there to be sure the shed is fully open.

Have a good day!

SteveL (not verified)

Thanks for the comments... now to go and do it!! ;-)

Perhaps this pattern - and others with a lot of warp color changes - are better suited for a warping board.  Sometime I'll have to get someone to show me how to use one!

I wanted to think this through before becoming entangled in warp.  I hesitate to call this a "method" - it's more like and idea or proposal as to how I might approach this.  I still need some thought as to how to do the block changes - where two ends of the same color are adjacent.

I was also thinking about the Log Cabin variation where there's an odd number of warp ends in a block ("warp #2" in "Conversation and Notes on Log Cabin" by Leslie Voiers).  However, direct warping is inherently "even" as you pull a loop of warp - creating two ends - through a heddle slot.  Perhaps I'll abandon this idea and stick with an even number of ends in a block for this try...


Steve

francorios (not verified)

SteveL,

Yes, simplify! Make it even number of ends for this try! My head is spinning enough try to keep track of five pairs, much less trying to keep track of five pairs plus one!

I direct warped, then I threaded the heddle two pairs at a time, just like you described, working with a chart on the table next to me. It took me 30 minutes to warp the loom and wind up the warp. It took me almost two hours to thread the heddle, but I bet it will be half that time on the next scarf.

Have a good day!

SteveL (not verified)

Thinking further about this task while doing yard work this beautiful Indian Summer afternoon here in Ohio, I came up with a simplification, but it depends on the ability to pull a loop through a hole.  Ease then depends on warp material and heddle hole size.  Anyway, it looks like this - start by pulling one loop through a slot, and the other color loop through the adjacent hole:
 
|      o      |      o      |      o     |     o
 
Aa    Bb                   Aa    Bb
 
(|=slot, o=hole, A=end, B=end, capitalized=final position)
 
From this initial threading, wind the warp on it's beam, inserting paper as usual until you're left with a foot or so of the warp.  This starting position shortens the number of end moves needed to correctly redistribute the warp as it's sleyed through the heddle.  Here's the first move: 
 
move one 'b' color/end right from hole to next hole:
|      o      |      o      |      o     |     o
Aa    B             B      Aa    B          B
 
next, move one 'a' color to the next slot
|      o      |      o      |      o     |     o
A     B      A      B     A      B     A    B 
 
And you're done!
 
Now, to setup the loom and get busy!
Steve

Caroline (not verified)

Interesting! I'm about to warp up, having suddenly realised I did not have any plain yarn to weave with. My colour choices are very limited, almost repulsive actually, but  this is about learning, not producing a fashion accessory, right? I think I'm about to prove why blue and green should never be seen together, ;-)!