Lyn in AZ (not verified)

Glimakra and longer heddles

My Glimakra Standard came with 32.5 cm or 12 3/4 inch texsolve  heddles (sorry don't know the number) and I did have problems with the sinking shafts hitting the upper lamns.

This is an older loom and it had the original string heddles - I ended up putting them back on the loom - for one thing I can see them better  to thread -  they are 27 cm - which is quite a bit shorter but  I still get a very good shed. 

conib (not verified)

I found an old Weaver's magazine article by Madelyn van der Hoogt and David Xenakis that Madelyn has made available on her Weaver's School website:

        http://www.weaversschool.com/docs/Countermarch.pdf

It shows a tie-up she developed using 330 mm heddles which gives a maximum shed.

One of David's contributions to this tie-up is the use of large rubber bands to tie the ends of the upper lamms to their bottom shaft bar, which aleviates the problem Lyn in AZ saw where upper lamms move out of the aligned position with their corresponding shaft bars and hit adjacent ones.  (Although it seems to me that using a loop of Texsolv instead of a rubber band would make it easier to rearrange heddles -- but then you'd want a hole in the upper lamm ends since the Texsolv isn't "clingy" like rubber.)

Anyway, I'd love to hear from anyone who's ever implemented Madelyn's tie-up themselves.

-- Constance

conib (not verified)

I found an old Weaver's magazine article by Madelyn van der Hoogt and David Xenakis that Madelyn has made available on her Weaver's School website:

        http://www.weaversschool.com/docs/Countermarch.pdf

It shows a tie-up she developed using 330 mm heddles which gives a maximum shed.

One of David's contributions to this tie-up is the use of large rubber bands to tie the ends of the upper lamms to their bottom shaft bar, which aleviates the problem Lyn in AZ saw where upper lamms move out of the aligned position with their corresponding shaft bars and hit adjacent ones.  (Although it seems to me that using a loop of Texsolv instead of a rubber band would make it easier to rearrange heddles -- but then you'd want a hole in the upper lamm ends since the Texsolv isn't "clingy" like rubber.)

Anyway, I'd love to hear from anyone who's ever implemented Madelyn's tie-up themselves.

-- Constance

Annabell (not verified)

I have a standard glimakra 10S/10T with the regular length heddles (white twist ties) but I still use this tie up system with two changes:  first, I adjust the length of the cords to account for the shorter heddles (slightly longer from the overhead jacks to the upper shaft bars and from the lower shaft bars to the upper lams), and second I use a knitting needle under the treadle to hold all of the lengths of cord in place!  It still works great and is easy to implement. 

Annabell (not verified)

I have a standard glimakra 10S/10T with the regular length heddles (white twist ties) but I still use this tie up system with two changes:  first, I adjust the length of the cords to account for the shorter heddles (slightly longer from the overhead jacks to the upper shaft bars and from the lower shaft bars to the upper lams), and second I use a knitting needle under the treadle to hold all of the lengths of cord in place!  It still works great and is easy to implement. 

Ellen (not verified)

Hi, Annabell

I have a loom like yours, and look forward to trying this method, when I get over to my loom, which unfortunately "lives" 4 hours' drive away. I can't really picture exactly what you do with the knitting needles, though. Would you mind explaining?

Ellen (not verified)

Hi, Annabell

I have a loom like yours, and look forward to trying this method, when I get over to my loom, which unfortunately "lives" 4 hours' drive away. I can't really picture exactly what you do with the knitting needles, though. Would you mind explaining?

TinaHilton (not verified)

That sounds like Becky Ashendon's method for tying up the treadles.  You can see her instructions here on her web site.  I tried it and liked it better than the traditional way, but still wasn't happy with having to mess with the bottom of the treadle.  And if you wanted to change the cord to the first shaft (closest to you) you had to pull the knitting needle out of all the cords and potentially lose your place.  I ended up changing again to the method recommended in this Weaver's article. Check them all out and see which one you might like the best. 

TinaHilton (not verified)

That sounds like Becky Ashendon's method for tying up the treadles.  You can see her instructions here on her web site.  I tried it and liked it better than the traditional way, but still wasn't happy with having to mess with the bottom of the treadle.  And if you wanted to change the cord to the first shaft (closest to you) you had to pull the knitting needle out of all the cords and potentially lose your place.  I ended up changing again to the method recommended in this Weaver's article. Check them all out and see which one you might like the best. 

Ellen (not verified)

Hi, Tina.

Thanks for the links. I had already seen the last of the two methods you mentioned, ans did not know there were more, so was just confused as to where those knitting needles came into it. I think I'll stick to method you said you prefer, maybe with my own little moderations.