Phoeb (not verified)

Actually, it's not all that bad. Besides, I have a cat that loves to check things out and I'd be very afraid of him letting the pawl loose.

 

No I haven't posted anything, cuz all I've done is 3 plain scarves. I warped some towels yesterday and really messed them up. It'll be interesting to see how they turn out even if they don't follow the pattern I was trying to use.

nanaspins (not verified)

I posted on December 3rd about my problems with the ratchets and pawls continually failing on my Ashrord RH loom. After several e-mails and my sending some pictures to him, Richard Ashford solved the problem. It seems the front and back ratchets are different. The teeth face opposite directions. When I traded the ratchets, the pawls fit correctly. Those of you having the same problem might want to check. The teeth should angle toward the center of the side, not toward the end. I must say I was impressed with the help I received from Ashford's!

Now to work through all the "normal" frustrations of a new weaver :)

Gayle

whiteoakgrandmother (not verified)

I double checked my Ashford rigid heddle loom after reading your post, and my ratchets are installed correctly, so this was not the source of my problem. I've owned the loom for about ten years and it was a frequent problem before I came up with my "pawl lock." It hasn't happened since.

Phoeb (not verified)

To update. I now have given my C-clamps to himself. I changed the front to the back rachet and, wow, no problems. I am so happy, I could cry.

patle (not verified)

I just joined Weavolution so I could properly thank Gayle for posting her comment about the pawls having directions. I found this thread when I was driven to extreme frustration by constantly slipping pawls. After reading Gayle's clear description, I checked my pawls, quickly switched them (in the middle of a project) and the problem was solved! Yay! Now back to the routine frustrations of learning to weave . .  You gotta love it!

moxie3601 (not verified)

I just started setting up a project on my new Ashford table loom, and couldn't get the warp tension to hold as I wound it on the back beam. Checked the instructions twice, and the ratchet & pawls were assembled according to the instructions. I remembered reading something about this problem when I was researching the loom, so I did a Google search, and bingo, here I am! Switched the parts around as described in this thread, and everything works the way it should ;-)

Aunt Janet (not verified)

I'm not sure what your question is here, Felzitas.  In what projectw would one use handspun yarns?  Well, you are right that they are special, but I think all handwoven articles are also special.  I'm working on a rug with all handspun wool weft in plain weave stripes.  Next rug will also be all handspun weft in double weave stripes, colors on one side neutrals on the other side.  When the rugs come off the loom, I'm planning a set of dish towels.  I'll use commercial cotton for the warp with my handspun cottons in the weft.

I've used my tightly spun wool yarns in backstrap bands, warp and weft.  I've used merino, Romney, Coopworth and other breeds.  The merino made a shiny smooth band.  The romney made a very sturdy belt..  These are overspun in the plied yarn to make them firm enough to hold up to the rigors of backstrap, and not get sticky sheds.  The less hard spun alpaca that I tried on backstrap wouldn't open sheds after an inch of hairy weaving.

I've woven ruanas with all handspun yarns, blankets, pillow tops.  My niece made some cute mini skirts made with fabric I wove of handspun, hand woven  We are planning to collaborate on clothing in the future.

So, what are you planning to weave with your handspun yarns?

Aunt Janet

felizitas (not verified)

I am not planning for a certain project but I am looking for ideas to use handspun in general.If you are breeding sheep your interest is to use your own material. I like to spinn but I have to buy all the material. Spinning is a lot of work and that efford should be shown in the handwoven. Yesterday I looked trough the journal handwoven again and I found an articles that express what I mean. "Showing of novelity yarns". This is the same question as for handspun. What is the best way to use it making it worth. Hopefully that makes my question clearer. Felizitas

 

Caroline (not verified)

Felizitas, many of the wonderful handspun yarns that you see are not suitable for warp yarn, and some are too softly spun for weft even, having been designed for knitting. If you have a pretty textured yarn, you would not want to hide it in a twill fabric, so a plain weave would take advantage of its special characteristics. Is this what you mean?

You would also not want to use soft spun yarn in a fabric that will have to wear and wear. Shawls and scarves need to be soft, as do baby garments, but bags, belts and most outwear clothing are better made from harder wearing and tighter spun yarns. You would need to spin them worsted style rather than woolen.

Different breeds of sheep produce differing grades of fleece, some more useful for some purposes than others. Sampling, reading up, then more sampling will help you here, as would joining a couple of spinning groups, where you have spinners, weavers and knitters to learn from.

Experience will help you make appropriate decisions, but please don't stop asking questions - sooner or later someone comes along with just the information you are looking for!

Hope this helps a bit!

cheers, Caroline

felizitas (not verified)

"If you have a pretty textured yarn, you would not want to hide it in a twill fabric, so a plain weave would take advantage of its special characteristics. Is this what you mean?" Thats it.

I have thought about the question that not all yarns are suitable as warp and I could mention the different use of woolen and worsted. Thank you so far.

Felizitas