Diane Roeder (not verified)

This is a lovely rug.  The edges look nice and neat from what I can see, and the colors work so beautifully together.

Diane

Caroline (not verified)

Hi, I was reading something recently that explained that the reason its hard to use a boat shuttle with a rigid heddle loom is because of the tension. Apparently its also hard to use a boat shuttle on a table loom that does not have a shuttle-race fitted to the beater, though I stand to be corrected on this one. However I do know there are weavers who have successfully used boat shuttles on their rigid heddle looms, but I don't know any details of the loom, fabric width, sett etc, and what sort of difference this would make.

You will need to use a stick shuttle that is a bit wider than the piece you are weaving, so if your cloth is sett at 29 inches wide, a 30 inch stick shuttle is fine.

Hopefully someone will come along shortly with a few tricks to help you out!

Rainbunny (not verified)

Thanks, Caroline! I was able to use my boat shuttle when I was doing a narrow sampler in fairly heavy wool, but not with this combination of length and finer fabric. It does seem to be a tension problem, as you suggest, since it seems the lighter thread can't support the weight of the shuttle.

I'm going to try the stick shuttle after work today, and see how I make out!

 

spinningalpaca (not verified)

The Schacht Cricket would do that for you--ten inch weaving width and a solid body construction.

francorios (not verified)

You could make a little frame to attach to a rigid heddle loom. This was my Erica loom. More details on my website.
 
The Schacht Cricket is a solid little loom that I can take anywhere. Usually I prop it up on a little wooden folding table (tv tray), but many people weave with the Cricket on their lap.
 
It's a narrow loom, but it is definitely portable. You can see mine on my blog
 
Have a good day!
 
 
 

 

cheriberi (not verified)

 Thank you for your suggestion and the photo. I never thought of something like that. Very interesting!

 

Cheryl

francorios (not verified)

You're welcome.

I've used my loom "kick-stand" while at the fair and at livestock (rabbit) shows. It adds portability without a lof of expense.

I'm planning to make another stand out of PVC pipe for my loom, but taller, about 32 inch tall to raise the back of the loom higher than my hips when seated. So that I don't have to lean over as far when advancing the warp or doing pickups on the loom.

I'll post that on my blog when I'm done.

Have a good day!

cheriberi (not verified)

 Sounds great! If you can share how you did it that would be terrific. Now I'm really excited!

conib (not verified)

Oh yes, they are wonderful!  Thank you so much Ellen for posting your project!
:-)

-- Constance