toothdoc9 (not verified)

Hi Lisa, Jennifer here (Charles' wife),

I have a Toika (Finnish loom) and yes, it is very quiet (countermarche) but the tie up just takes an incredibly long time and you sit underneath (pack your lunch and maybe dinner) and prepare for a long sitting to tie up lams and treadles.  Toika does make a computerized loom, but it is very expensive.  I love my Toika, but I am selling it.  I finally got a used AVL FDL with Compudobby III and the whole loom cost as much as just adding the computer to the Toika.

Bonnie Inouye (not verified)

I bought my first AVL loom new in 1987 (there were hardly any used AVL looms then)  with a single-box flyshuttle, 60" width, 16 shafts and the bars and pegs. The flyshuttle took about a day before I was used to it, and it has worked extremely well ever since.  Having just two treadles is much better for your posture than leaning over to reach treadles at the sides of the loom. There are tricks for using bars and pegs for long sequences. Many wonderful designs can be woven from the same 16 or 32 bars, just as many designs can be woven on one tie-up. It is much easier to move the pegs than it would be to get under the loom and tie up 18 treadles!  I found it fairly easy to learn on the bars and pegs

I included a lot of tips for dobby bars in my book, Exploring Multishaft Design. I still have a few copies at home- it is not out of print yet.

The cloth storage system is totally wonderful.I now own 3 AVL looms but not all in the same place.

Bonnie

 

Weeweaver (not verified)

My AVL Modular loom has 12 shafts and 14 treadles and I think the one thing I am most impressed with is the way the treadles are tied up. Instead of crawling under the loom, it uses the side tie-ups like the Home Loom. I have just finished tieing up my LeClerc Medico with floor conversion and rolling around on the cement floor was almost enough to make me decide to use the levers instead. My Modular, named "Jolly Brown," is a full frame 60" loom from the early 80s and I am just about ready to put it back together again. First, though, I have to finish my Halloweave project.

filigreegarden (not verified)

Ooops, sorry for the second post. The browser got stuck in the middle of posting and it seems to have duplicated my message. Is there a way to delete it?

Janet (not verified)

 Hi,

When I am using a heavier yarn, I often untwist it and for the last inch of yarn in the shed of the color change and cut off one or two plies (on a three ply yarn) which leaves one ply of the last inch.  Then, I cut one ply (if there are three) off the first inch of the yarn I am beginning and press it together a little firmer. This usually works because I have the same number of total plies of the yarn in question.

I hope this helps. It's a little awkward to explain. I understand the problem and that's what I have done.

Janet

filigreegarden (not verified)

Oh I see what you mean. Thanks. I will give this a try.

claudia (not verified)

This exhibit is remarkable. The tapestries look like paintings or photographs.

Thank you for all the amazing resources you have shared.

Claudia

claudia (not verified)

Oops, missed that one by a mile.

: ) Claudia

Claudia Segal (not verified)

There was another discussion about wet finishing HERE.  Not sure if that's the one you are looking for, Deb.

Did you try browsing through your new landing page to see if the topic is there?

Claudia

Lace Weaver (not verified)

The deadline to join will be Jan. 31, not Jan. 1. Kathleen