francorios (not verified)

Those towels came out really well.

Can you tell us how you did the finish?

Did you hem stitch? Did you twist the fringe?

Inquiring minds want to know.

Have a good day!

francorios (not verified)

You washed it?!! Very good! You are making progress.

If this towel will go anywhere near the stove, trim it or braid it.  My towels that have wild fringe have caught fire more than once. You could call them self trimming, but that's dangerous. The fluffy fiber is flammable. Fiber that is spun doesn't catch fire as easily and will usually smolder out once the heat is removed. This only applies to cotton fiber. Synthetics are a different story.

If these will be used as table runners or mats, you could leave the fringe wild.

Have a good day!

 

francorios (not verified)

Could you post a picture of the reed you used? Are the teeth steel round wire or flat wire or some other material?

My favorite thing about backstrap weaving is the weaver can make up all the pieces for their loom.

I've seen pictures of backstrap weavers sitting in a big frame and using multiple shafts and reeds. I'd like to know how they make reeds for their looms. That would be a handy thing to know for producing balanced weaves on the backstrap loom.

Have a good day!

Franco Rios

jenadina (not verified)

This is something I've been considering, Deb. I really, really like finer threads and sometimes I feel 24 epi with 2 rigid heddles to be too limiting. I really want to weave yardage for sewing, and bulky clothing is not my style :)  Thanks for sharing that it works!!

jenadina (not verified)

Curious...if you have a master set of string heddles on a dummy warp, do you have it threaded as for a straight twill? Would that maximize the patterns you could weave? I like this idea. I like string heddles, but I really dislike tying them. I've debated on buying texsolve heddles, putting them on a stick, and calling it good :)

Caroline (not verified)

Rather than having a permanent dummy warp,once you take your piece off the loom, you could tie the rest of the remaining warp so the reed still holds it in place. You would attach a new warp to this, then just pull the reed onto the new warp when its time to use it again. But the weight is a worry, particularly with fine warps. You would have to make your own using something strong and light like bamboo strips, and I'm not sure I would have the patience for making something like that.

I know coarser reeds can be made using craft sticks, but I suspect that using a good batten is going to be quicker, lighter and easier.

Caroline (not verified)

Even the heddle out of one of those children's looms would work. Some of those little toy looms out of China are surprisingly well made, and they have a plastic heddle, usually around 8 or 10 dpi, and about 6 inches wide, which is a nice working size. They are also very reasonably priced; they sell for under $15.00 over here and there is no way you can buy a rigid heddle from any of the loom manufacturers for that!

I was also able to get some heddle pieces from villagespinweave.com here:

www.villagespinweave.com/IBS/SimpleCat/Product/asp/hierarchy/060A/product-id/373082.html

And they are ideal for strap weaving; they are very, very light.

In fact none of the rigid heddle reeds are very expensive, and they stock quite a few different brands.

francorios (not verified)

Very good idea. I've looked at matchstick blinds as possible candidate for rigid heddle, I wanted to drill holes in the sticks, but it looked too thin. Never really thought about using it for a reed. It may not be sturdy enough for beating.  I may have to try it anyway. It wouldn't cost much to buy some placemats made from thin bamboo strips that might fill the bill.

Let me know when you post a picture of your sling braid collection.

Have a good day!

Aunt Janet (not verified)

Those are lovely, Laverne.

 i just set one of my daughters up on a rigid heddle loom.  It is not a very good loom, and we can't get very good tension on it.  I would show her how to use it with a backstrap, but she is quite pregnant.  Anyway, this is my daughter who has a problem with new things.  I'm giving her baby steps.  I'll see if she can go backstrap with it on her next project.  She always pushes through the "new thing" and feels really good after the learning is over.  I'm encouraging her to weave, because I wish i had started weaving at a younger age.  

The grandbabies don't stand a chance.  They will be weavers.  Four y/o Sammy was here yesterday when i was weaving on my Glimakra band loom.  He got to step on the treadles as I wove.  It was slow going, but it is one of his steps to learning.  Next he stood in front of the loom for a while, changing sheds and beating in the sheds with a sword.  He doesn't get the thread part yet.  Give him  a few more months.  Now his little cousin, Celia, will be weaving before she makes four.  She is very dexterous and determined.  She is close to spinning yarn with her tiny fingers.  We check on my angora rabbits together she plucks a little bit of fiber and finger spins to the best of her ability.  It doesn't usually amount to anything, but once in a while she gets a tiny bit of fiber twisted into a short piece of yarn.  "I did it!" is the usual reaction.  Isn't that just how we feel when we finish a new technique!  I know they will be weavers because I am very good at making it fun for them.  They keep coming  back for more.  I also fully expect grandkids to come here when they are teens and can't stand to be around their parents.  They will be weaving out their teen problems.  Planning ahead.

Aunt Janet

Aunt Janet (not verified)

Thank you, Laverne.  I have an interesting life, and lots of stories to tell.