jenadina (not verified)

Have you looked at the Leclerc Begere? It's 24" wide and has metal ratchets/pawls, and also has beams, which I like because you can put on a longer warp and still have good sheds. I don't have this loom, but it's the only loom I've seen on the market that is similar to mine (a 24" CraftYarns loom), and I really like mine.

Peg.Cherre (not verified)

I have an old Leclerc Bergere, and love it!  It's not a folding loom, but that's not at all important to me.  I love the rachet & pawl on both beams, the amount of yarn I can put on, the overall working of the loom.  Mine is 18", a size they don't make anymore, and is just the right size for me.  For what it's worth, if you're convinced on the Glimakra, I'd suggest you get the 19" - you'll have so many more options.

fantasticfelter (not verified)

As RH looms go the Emilia is great! I have 5 for teaching on in shops. I do not prefer RH looms for wider weaving, over 15" personally, the constant lifting and docking and undocking can be hard your shoulders and neck, as compared to treadle looms. But rigid heddle looms ( rh )are a great way to be introduced to weaving for a few hundred dollars. They are a lot of fun. I have a weaving studio in the Santa Cruz mountains http://www.saorisantacruz.com which is a registered Saori weaving studio. But many knit shops like RH looms because you can use knitting yarns as warp for classes in there shops. Someone mentioned the slippage on the stand of the ashford knitters loom. I do not have stands for my two , they are 12", but if you buy locking washers and place them against the wood your knitters RH loom will not slip. The ashford rh folds gracefully I like it. But my first choice is the Emilia . Glimakra also makes the suzanna a, non folding 27" table top model RH loom.

Marianne88 (not verified)

I have an old Leclerc Bergère and I love it.  It is strurdy and as Peg.Cherr I like the rachet and pawl on both beams. Mine is 24" but as it is an old loom, I can't put a second heddle on it.

fantasticfelter (not verified)

I am from the "more seams the more interesting " weaveing artist point of view. IF we are treating weaving measly as a craft as apprised to art, then get a wider loom. But the opportunity when we weave 12" verses 20" widths on a RH loom is so more interesting . If you can see a straight stitch either by hand or machine that is all you need to know. Even cutting up pices and juxtaposition stripes and area that before would be predictable and make blankets clothing, etc sparkle with fresh enthusiasm . My blog has examples http://centeringwithfiber.blogspot.com So my feeling is wider is not always better. Epically with RH weaving . The wider heddle demands two hands to beat and you really need a floor stand with the wider RH looms to be comfortable. The 12" 13" RH looms are more portable as well if that is your intention to take around the house on vacation etc.

kbird (not verified)

I'm not sure if it's the same one as was listed on ebay, but that one went for about $177, I think...  I like the weaving angle for these types of looms.

TinaHilton (not verified)

I hestitate to reply, because I just used my handspun in weaving for the first time!  I did knit one small scarf using handspun too.  Anyway, I was told to always wash the yarn after plying to help set the twist.  If someone with more experience has a different answer, I defer to them. 

amelia (not verified)

Washing the skein before weaving would help the twist awaken, so if your singles had stale twist and your skein is acting overplied, when you wash it, the singles' twist is re-awakened and can more properly balance (one hopes, if that was one's goal, that is) the ply twist. It will also remove what it can of any hand oils that got introduced during spinning the yarn.

But the other thing I'd do, for warp at least, and probably weft too, for balance, is block the yarn out, dry it with weights -- so it's not so elastic and stretchy on the loom.  I say this after *not* blocking a skein and mixing it with some commercial yarn on a warp -- boy howdy, was it hard to get a nice tension across that warp.  But the only threads that broke, in the end, was the commercial yarn (at the selvedges, so really not its weakness or anything, just where I had it).

TinaHilton (not verified)

So in the scarf I just finished, which still needs to be washed and photographed, if I'd blocked my skein that turned out springy it would have been better?  The yarn wouldn't go back to being springy (back to its normal state) after the scarf was wet finished? 


dteaj (not verified)

I weave all the time with handspun and do not wet finish prior to weaving. I do not block. I do have plenty of stale singles that are then plied. I've never had problems with this. I just ply them to match a wet finished plied sample strand of about 6 inches. I really don't have any handspun yarns acting overplied (unless I do it on purpose :-)), so I don't understand amelia's experience.

In knitting, you want the yarn to be all fluffed out before knitting. It's just easier to get your gauge right and it feels better on the hands, having a maximum of springiness. In weaving, you want the yarns to sink in together after the web has been woven and you want the yarn to be at a minimum of springiness on the loom. Commercial wool weaving yarns often have oils in them which are meant to be washed out after weaving during the fulling process. Harrisville is a great example. They sell cone yarns with oils in them for weavers. They go out of their way to wash the same yarns and produce them in skeins for their knitting customers.

Tina - wet finishing will bring back springiness to wool. The fibers relax and return to their naturally kinky state! I do hope you sampled to the point of wet finishing before weaving? It's always a good idea to do, even with precious handspun.