I just finished a scarf on my knitter's loom that was made with inexpensive Lion Brand worsted wool yarn in a modified log cabin plaid using a 7.5 dent reed. (6 dpi would have been ideal, but the knitter's loom choices were 5 or 7.5, so I went with the closer sett.) This was my first use of a heavier wool on this loom. I had no trouble warping or weaving with the wool, but one thing bothered me: At the color changes - and in log cabin plaids there are quite a few, I didn't like the bulk and awkwardness of the places where color changes occurred and one color ended. When using finer yarns you can't really see the extra thickness of the ending color when it is tucked into the next shed. But with thicker yarns, like this wool, the tucked in end becomes more obvious. Someone suggested wrapping the ending color around the selvedge warp yarn and tucking the end back into the same shed before beating. However, this doesn't allow catching the ongoing color yarn at the edge when doing the 1:1 picking of log cabin with two shuttles, if that makes sense.

Does anyone have any tips for reducing the bulk at color changes when using heavier yarns, and for making these changes smoother so the tucked in ends are not as visible?

Comments

filigreegarden (not verified)

Ooops, sorry for the second post. The browser got stuck in the middle of posting and it seems to have duplicated my message. Is there a way to delete it?

Janet (not verified)

 Hi,

When I am using a heavier yarn, I often untwist it and for the last inch of yarn in the shed of the color change and cut off one or two plies (on a three ply yarn) which leaves one ply of the last inch.  Then, I cut one ply (if there are three) off the first inch of the yarn I am beginning and press it together a little firmer. This usually works because I have the same number of total plies of the yarn in question.

I hope this helps. It's a little awkward to explain. I understand the problem and that's what I have done.

Janet

filigreegarden (not verified)

Oh I see what you mean. Thanks. I will give this a try.

Submitted by Anonymous (not verified) on